Springs  There are 51 products.

per page
Showing 1 - 12 of 51 items
  • £ 0.63   £ 0.52 exc. VAT
    In stock

    Spring For Seats 3" - Double Cone - 9 gauge Strong and galvanised springs for seats  In seats, they are traditionally sewn and tied over a jute webbing. New springs will be very strong in comparison to those you have removed. It may be necessary to replace with a size smaller to be kind to an old frame. The higher the gauge number the thinner the wire.

    £ 0.63
    £ 0.52   exc. VAT

  • £ 0.68   £ 0.57 exc. VAT
    In stock

    Spring For Seats 3" - Double Cone - 9 gauge (4T110) Strong and galvanised springs for seats  In seats, they are traditionally sewn and tied over a jute webbing. New springs will be very strong in comparison to those you have removed. It may be necessary to replace with a size smaller to be kind to an old frame. The higher the gauge number the...

    £ 0.68
    £ 0.57   exc. VAT

  • £ 0.78   £ 0.65 exc. VAT
    In stock

    Spring For Seats  6 1/2" - Double Cone - 9 gauge (6T170) Strong and galvanised springs for seats  In seats, they are traditionally sewn and tied over a jute webbing. New springs will be very strong in comparison to those you have removed. It may be necessary to replace with a size smaller to be kind to an old frame. The higher the gauge number the...

    £ 0.78
    £ 0.65   exc. VAT

    1 Avis

  • £ 22.56   £ 18.80 exc. VAT
    In stock

    No-Sag Spring EK clips Osborne  - 7/8" wide - 3/4 holes Pack of 100 They are fully plastic coated to resist spring abrasion. Made from heavy steel construction, keeps clips from opening when springs are in tension. They can hold zigzag springs from any gauge securely, and are adapted as well for back and seat constructions.  

    £ 22.56
    £ 18.80   exc. VAT

  • £ 2.96   £ 2.47 exc. VAT
    In stock

    No-Sag Spring EK clips Osborne  - 7/8" wide - 7 holes They are fully plastic coated to resist spring abrasion. Made from heavy steel construction, keeps clips from opening when springs are in tension. They can hold zigzag springs from any gauge securely, and are adapted as well for back and seat constructions.  

    £ 2.96
    £ 2.47   exc. VAT

  • £ 30.49   £ 25.40 exc. VAT
    In stock

    Hog Rings - Sharp Point - C.S. Osborne N°1442- 1 kg  Bright finish, low carbon steel, not galvanised, polished. 14 wire gauge. Size 3/4” Used with the hog ring pliers ref: OS-1440A  Usually used for Nosag Springs. 

    £ 30.49
    £ 25.40   exc. VAT

  • £ 3.92   £ 3.27 exc. VAT
    In stock

    Hog Rings - Sharp Point - C.S. Osborne - 100 g Bright finish, low carbon steel, not galvanised, polished. 14 wire gauge. Size 3/4” Used with the hog ring pliers ref: OS-1440A  Usually used for Nosag Springs. 

    £ 3.92
    £ 3.27   exc. VAT

  • £ 0.73   £ 0.61 exc. VAT
    In stock

    Spring For Seats 5"1/2 - Double Cone - 9 gauge  (5T140) Strong and galvanised springs for seats  In seats, they are traditionally sewn and tied over a jute webbing. New springs will be very strong in comparison to those you have removed. It may be necessary to replace with a size smaller to be kind to an old frame. The higher the gauge number the...

    £ 0.73
    £ 0.61   exc. VAT

  • £ 26.04   £ 21.70 exc. VAT
    In stock

    Chain and Hook Kit  - (30 welded chains and 60 "S" hooks) It contains: - 30 welded chaines of 15 cm- 60 "S" Hooks (30 of them are attached to the chaines) A video is  available below to show you how this kit can help with the lashing of springs. 

    £ 26.04
    £ 21.70   exc. VAT

  • £ 0.99   £ 0.83 exc. VAT
    In stock

    Spring For Seats  8" -  Double Cone - 9 gauge (7T200) Strong and galvanised springs for seats  In seats, they are traditionally sewn and tied over a jute webbing. New springs will be very strong in comparison to those you have removed. It may be necessary to replace with a size smaller to be kind to an old frame. The higher the gauge number the...

    £ 0.99
    £ 0.83   exc. VAT

  • £ 47.12   £ 39.27 exc. VAT
     6 days

     Dispatched within 6 days Spring Bender C.S Osborne  N°401-1 This tool can be used to bend or unbend serpentine springs. It is precisely manufactured so that arcs, angles and curves can be properly shaped.  Available in 2 sizes. 

    £ 47.12
    £ 39.27   exc. VAT

  • £ 47.38   £ 39.49 exc. VAT
     6 days

    Spring End Former Osborne N°404 Crimps the end of zig-zag springs and opens end coil springs.   A tough tool to make work easy.   Comes with three bolts and nuts. Bolt to corner of bench or 1” block no more than 5” from edge of bench.   It can be used in a vise. 5/16” holes drilled 1-3/4” apart.

    £ 47.38
    £ 39.49   exc. VAT

Showing 1 - 12 of 51 items